Lateral move irrigation is often times seen as one of the most highly efficient methods of irrigation. We can help you assess your situation, considering the complete irrigation system - including water source, delivery and field application. We ensure lateral move irrigation gives you what you need - peace of mind and the potential for greater profitability.
Maximize irrigated area - A linear typically irrigates 92% to 98% of a square or rectangular field.
Reduce labor costs - A linear can reduce your labor as much as 50% compared with surface, side roll or hand move irrigation.
Maximize crop production with limited resources -Linears conserve water by applying only the amount of water that's needed, where it's needed.
A multi-purpose farm tool - Linear irrigation does more than just irrigate, it may be used to provide your farm management program with chemigation, fertigation, germination and leaching.
Linear Application Guide
|Maximum Length||3400 ft (1036m)||1300 ft|
|Dependent on guidance and electrical choices|
|Span Length Choices||All available||All available||Ranging from 127 ft to 205 ft|
|Span Diameter Choices||6 5/8, 8 5/8||5, 6 5/8 in.||Diameter choice to minimize pumping cost|
|Hose||YES||YES||Water delivery from a pressurized pipeline|
|Ditch/Canal||YES||NO||Water delivery from an open ditch or canal|
|End Feed||YES||YES||Cart at the end of the linear|
|Center Feed||YES||NO||Cart at or near the middle of the linear|
|Power supply||cord drag, genset||cord drag,|
|Customer choice - cord drag allows use of public power|
|Cart mounted pump||Optional||NO||Engine driven pump mounted on the cart to boost the incoming pressure|
The lateral move sprinkler irrigation,also called Rainger consist of multiple towers, which are supported for a spraying pipe. While lateral translation, the machine doing spray irrigation operation, with high efficiency, energy saving, water saving production and labor- saving features.The lateral move sprinkler irrigation maximum use of the land of a square or rectangle, and farmland application rate could reach 98%.
As a fully functional irrigation equipment, IRRITEC irrigation not only can be used for spray irrigation, but also be equipped with spray of chemical fertilizer and pesticides. It is the best way to promote the growth of crop and reduce the land salinization.
The lateral move sprinkling machine could pass through farmland back and forth, and farmland application rate could reach 98%. This kind of lateral mover machine takes a common truck platform as its base. The truck could be equipped with special equipment, and take water from one of the two water sources. It could take water from the ground open water division canal, or take water from the closed system or water pipe. The truck also could be equipped with various optional parts, such as power device, water pump, generator, fuel box, chemical agent box and so on.
Linear irrigation offers great advantages of coverage and flexibility not found in other irrigation systems. These advantages can increase your field's potential and your bottom line. However, not all fields are suited for linear irrigation. Consider the complete irrigation system, including water source, delivery and field application.
Water Source Earthen ditch or concrete canal
Power Source Cart mounted genset
Guidance GPS, above- or belowground cable, or furrow
Typical field sizes 320-1,500 acres,130-607 hectares
Typical flow rates 500-4,500 gpm,32-284 lps
Chemigation On board tanks
Engines John Deere®, Cat®
IRRITECH Rainger line gives you the ability to customize the equipment to fit your requirements. Linear basic cart, equipped with a five-inch tube frame with outstanding durability to hold conditions. The same frame is used no matter your water source - you select what you need.
Water Source Pressurized pipeline
Power Source Cart mounted genset or power cord
Guidance Above- or belowground able or furrow
Typical field sizes 10-240 acres,9-47 hectares
Typical flow rates 200-1,400 gpm,12-88 lps
Hose sizes (I.D.) 4, 4.75, 6 & 8 inch HDPE 120, 150 & 200mm
Gensets Isuzu®, John Deere®, Deutz®
Packaging & Shipping
We will supply the standard exporting wooden box to load the irrigation accessories, and then put these boxes and the whole irrigation system parts into the 40 HQ container, and ready to ship to other countries all over the world throughout the famous shipping line such as COSCO, ZIM or the appointed shipping agent of foreigner clients.
1.Timely and professional irrigation design team for clients all over the world.
2.Careful installation and debugging of our irrigation system to support Chinese domestic and dispatch engineer to foreigner countries
3.Perfect after-sale service for clients of our irrigation system
4.Strictly control the 90% irrigation parts production using the most advanced machine
5.supply OEM prodution for USA famouse irrigation brand
Anhui IRRITECH Agriculture Equipment Corporation Limited is a high and new tech enterprise, professionally engaged in R&D, production and sales of irrigation machines and crop protection equipment used in large-scale farmland. Focusing on the labor saving, water saving, power saving and increasing yield, IRRITECH independently research and develop pivot and linear and other automatic irrigation system to offer the customers together with the professional before and after sales service.
IRRITECH has passed system management as ISO9001, ISO14001, OHSAS18001, IRRITECH products has certified "water saving equipment". One fully automatic production line guarantee the accuracy of cutting and welding, and guarantee the annual productivity of 162500m tubes for pivot or linear, at the same time, ERP system ensure the internal manufacturing and logistic quality.
IRRITECH was public in 2015(stock code is 835416). IRRITECH products has been successfully installed and used in most provinces in China to irrigate wheat, corn, potato, alfalfa, sugarcane, flowers, and fruits. Export to Mali in Africa, Cuba in South American, Kazakhstan and Tajikistan in Middle Asia. We are looking forward to corporate with distributors and customers to achieve win-to-win and long term benefit.
1.What kinds of pivots do IRRITECH produce?
Our products can be classified into three categories: fixed center pivot, towable center pivot, and lateral move system.
The main difference between these systems is their mobility.
1.The fixed system has one stationary end of the machine, while the other moves clockwise by motorized wheels.
2.Towable pivots have three or four wheels assembled at the center of the pivot, making it towable by tractor.
3.Lateral move systems work in a linear fashion, driven by motorized wheels. Unlike center pivots, where area is determined by the length of the machine, lateral move systems depend on both system length and distance traveled.
A towable center pivot should be a maximum length of 300m for safe towing, but fixed pivots can be much longer.
Compared with both fixed and towable systems, lateral move systems depend on the source of water. Ditch fed machines recieve water from the built ditch. Hose fed machinery recieves water from underground pipelines with hydrants. For hose fed systems, the maximum length is 450m because connecting one hydrant to another incurs labor costs.
2.PIVOT DESIGN CHOICES
When purchasing a center pivot system one must select:
Mainline size and outlet spacing;
Length, including the number of towers;
Application rate of the pivot;
The type of water applicator.
These choices affect investment and operating costs, irrigation efficiency, and crop production. Wise decisions will result in responsible water management and conservation, flexibility for future changes, and low operating costs.
3.What is the warranty on your products?
Warranty covers our center pivot and lateral move systems up to 1 year concerning electrical equipment, and 10 years or 10,000 working hours for gearboxes and gear motors-whichever expires first.
We guaruntee 15year use concerning our galvanized eqipment against corrosion, and 3 years for our tires and rims.
4.How much does your equipment cost?
Our pricing depends on the machine you are looking for, along with several other variables. In regards to our center pivots, we have both fixed and towable pivots and lateral move systems available. We will need to know your preferred water source (ditch or hose fed), land data and the types of crops that will be irrigated. Given this information, we will also determine the necessary sprinklers for your system.
5.What are your payment terms?
We accept 30% down by T/T (wire) or 70% by L/C or T/T before shipment.
6.How long will it take to manufacture and ship a center pivot or lateral move system?
Time spent on each order depends on the quantity and specifications of your order. Some machines we have in stock, but special orders require more time. We can provide you a time estimate once we have adequate information concerning your order.
However, we can say that lateral move systems take a longer time to produce, especially if you require a ditch feed water source. Because they also require a main cart pump, diesel engine, and alternator, time also must be included for our suppliers.
7.Are these machines difficult to operate?
Our machines are very simple, and you will be able to learn their functions within an hour's time. Once you learn to operate the systems control panel, it will function automatically. We are also currently working on a remote control for our systems, which should be released soon.
8.Do center pivots and lateral move systems work on rolling or mountainous terrain?
Yes, both systems can work on rolling or mountainous land. Lateral move systems only work on up to 5% slopes, but center pivot systems will work on up to 20% slopes.
9.What is the auto stop/reverse system and when can it be used?
In certain situations, a pivot will not finish a full rotation due to obstacles in the field such as terrain, poles, houses, etc. Now the auto stop/reverse system is needed. A touch device is installed in the tower of the pivot, when hit by the rod connected, the pivot can stop/reverse automatically.
10.Can I use fertilizer device on more than one machine?
Yes, you can use our chemical injector on more than one machine such as center pivot and lateral move systems. The chemical injector is small and easily transferred by just one person. It can also promise the safety of livings, you can find the details on the introduction.
11.Can I use fertilizer device on more than one machine?
If your field is rectangular and you are not using a lateral move system, you may need end gun to spray the area uncovered. The corner control systems can control when the end gun is spraying, so that no water is wasted on covered land.
12.Is the diesel generator included in my quote?
Our diesel generator is only included with lateral move systems, otherwise we will quote with electric power. If you would like, we can include the generator in your quote for other systems.
13.If I need a CFR price, what should I do?
All we need is your destination port. Then we will provide a CFR quotation by adding the freight cost provided by our freight forwarder .